Sisalation insulation in Syndal provides a reflective barrier that reduces radiant heat transfer through roofs and walls. In Melbourne’s climate, this is particularly effective during summer heatwaves, when a dark roof can reach temperatures over 70 degrees Celsius. By reflecting up to 97 percent of this heat, sisalation keeps the roof space cooler and reduces the strain on air conditioning systems.
For Syndal homes with brick veneer or weatherboard walls, sisalation can also be installed behind the cladding to block radiant heat entering the wall cavities. This is most practical during renovations or new builds, where the cladding can be temporarily removed. The foil must be installed with an air gap to function correctly, which is why it is not suitable for retrofitting into existing solid brick walls.
Combining sisalation with bulk insulation such as glasswool or polyester batts maximises thermal performance. In Syndal, ceiling batts with an R-value of R4.0 to R6.0 are commonly used, while wall batts typically range from R2.0 to R2.7. The reflective foil does not have an R-value itself but enhances the overall effectiveness of the insulation system by addressing radiant heat, which bulk insulation alone cannot block.